Why should I participate in the SF6 certification training?
In accordance with the EU 517/2014 directive on fluor gas and the implementing EU 2015/2066 regulation only certified personnel is allowed to carry out the SF6 gas handling (filling, measurement and reclaiming) in all EU member states.
What are the legal regulations?
New (EU) 517/2014 F gas regulation
This regulation has been in force since 01st January 2015 and replaces the 842/2006 directive on fluor gas. It is valid for the following fluorinated greenhouse gases:
- Partly fluorinating hydrocarbons (HFKW)
- Perfluorocarbons (FKW)
- Sulphur hexafluoride (SF6)
The aim of this regulation is to reduce or avoid emissions of fluorinated greenhouse gases. In accordance with this regulation only certified personnel is allowed to carry out the SF6 gas handling in the 28 EU member states. This regulation stipulates the required training and certification of personnel as well as reporting obligations.
Certification in accordance with the (EU) 517/2014 F-gas Regulation and (EU) 2015/2066 regulation
Article 10 of the new Regulation (EU) no. 517/2014 refers to existing requirements and states that existing certificates and training attestations issued in accordance with regulation no. 842/2006 shall remain valid, according to the conditions under which they were originally issued. The minimum requirements for the certification of personnel are laid down in regulation (EU) 305/2008.
Personnel carrying out gas handling works (such as filling, measuring and reclaiming of SF6) shall still be certified.
Is DILO an authorized company?
DILO is authorized by the Bayerischen Landesamt für Umwelt. The number of the certificate of approval is: 71-8730-47866/2010. The approval is valid until 31st December 2023.
What are the training fees?
For the training fees for the Refresher Training please contact our training hotline.
What is included in the training fees?
They include the training, lunch, soft drinks as well as relevant documents. Accommodation is not included in the above-mentioned price.
What is the training content?
The participants acquire minimum requirements of knowledge and skills in accordance with appendix 1 of the (EC) 517/2014 and 2015/2066 regulation:
|No.||Minimum requirements of knowledge and skills||Type of exam|
|1||Basic knowledge of relevant environmental issues |
(climate change, Kyoto Protocol, global warming potential),
the relevant provisions of regulation (EC), No 517/2014 and
of the relevant regulations implementing provisions of regulation
(EC) No 517/2014
|2||Physical, chemical and environmental characteristics of SF6||T|
|3||Use of SF6 in electric power equipment (insulation, arc quenching)||T|
|4||SF6-quality, according to the relevant industrial standards (1)||T|
|5||Understanding of the design of electric power equipment||T|
|6||Checking the SF6-quality||P|
|7||Recovery of SF6 and SF6-mixtures and purification of SF6||P|
|8||Storage and transportation of SF6||T|
|9||Operation of SF6-recovery equipment||P|
|10||Operation of tight drilling systems for suction lines, if necessary (gas tight drilling systems)||P|
|11||Reuse of SF6 and different re-use categories||T|
|12||Working on open SF6-components||P|
|13||Neutralising SF6 by-products||T|
|14||Monitoring of SF6 and appropriate data recording obligations under national or Community legislation or international agreements||T|
|15||Reduction of leakages and density controls||T|
|16||Basic knowledge of relevant technologies replacing or reducing the use of fluorinated greenhouse gases as well as safe handling|| |
Do I receive a confirmation of participation or certificate?
After successful examination you will receive a personal certificate (in accordance with the (EC) 517/2014 regulation on fluorinating gases as well as the (EC) 2015/2066 directive). The certificates can be issued in German and English language in DIN A4 and in form of a passport card.
When do the trainings take place?
For the training dates please refer to our overview list.
In which languages is the training be held?
Basically we offer our training courses in German and English language.
Is there a term of application?
No, there is no deadline. However we recommend making the application in time as each training course has limited vacancies. So training might also be fully booked if you wait too long.
When will the training be invoiced?
4 weeks before beginning of the training you will receive the invoice. Our terms of payment for the training are cash in advance. The certificate will only be handed over to the participants after receipt of payment on the second day of the training course at the latest.
What are the cancellation conditions?
Cancellations up to 14 days prior to the training are free of charge. For cancellations up to 7 days prior to the training we will invoice 50 %, and if cancellation is made on the day of training 100 % of the training costs are to be paid.
Is it possible to transfer my application to another colleague?
Yes, you have the possibility to appoint another participant without any additional charge. Just send an e-mail or let us know by phone.
Do I have to pass a test?
Yes, in order to achieve the acquisition of the permission to carry out the recovery of SF6 gas a theoretical and practical test must be passed.
What are the training times?
On the first day the training course is from 08:00 o'clock to 17:00 o'clock. The second day starts at 08:00 o'clock and ends at 16:30 o'clock. Dependant on the number of participants the training times may vary.
Where is the training location?
The training is held on the premises of DILO Armaturen und Anlagen GmbH in
87727 Babenhausen/Bavaria, Schöneggweg 9.
What is the number of participants per group?
The number of participants is limited to fifteen (15) persons in order to have in-depth training courses especially in the practical field. The practical training is held by two trainees so that the participants have the opportunity to put what they have learned into practice.
How to book a hotel room?
For this purpose there is a list of hotels. Of course, we would be pleased to assist you. Please contact Ms. Katheininger or Ms. Hatzelmann.
Is any protective clothing required for the training?
All training participants must wear safety shoes. Other protective clothing is not required.